Embedded systems development services in India, from bring up to production
INARH builds the firmware, drivers and device software that turn a schematic into a shippable product. Our engineers in Bangalore cover microcontroller selection, power budgets, board bring up, connectivity, OTA updates and secure boot, then stay through EMI testing, BIS and CE compliance and handover to your contract manufacturer.

What we do
1. Firmware and driver development
We write bare metal and RTOS firmware in C and C++ for ARM Cortex-M, RISC-V and 8-bit parts. Drivers, bootloaders and power management are built to hit your battery budget, not just to run on the bench.
2. Embedded Linux and RTOS
We choose between bare metal, FreeRTOS or Zephyr, and embedded Linux based on your timing, memory and update needs. For Linux we build Yocto or Buildroot images, device trees and kernel drivers.
3. IoT device and gateway development
Sensor nodes, controllers and gateways that buffer data through outages and publish over MQTT or HTTPS. Provisioning, fleet identity, signed OTA updates and remote diagnostics are designed in from day one.
4. Edge AI and TinyML
We run quantised models on microcontrollers and small SoCs for keyword spotting, anomaly detection and vision. Inference time and current draw are profiled on the target so the model fits the power budget.
5. Board bring up and hardware software co-design
We review schematics before fabrication, then bring up new boards rail by rail and clock by clock. Working with your hardware team on pin muxing and debug access saves respins.
6. Connectivity
We integrate BLE, Wi-Fi, Thread, LoRa and cellular stacks, including NB-IoT and LTE-M, with attention to coexistence and reconnection behaviour in the field.
7. Testing, certification and manufacturing handover
We build hardware in the loop rigs, prepare devices for EMI, BIS and CE testing, and design production test fixtures. Your manufacturer gets documented test procedures.
Why it matters for your business
Hardware mistakes are expensive to undo. A wrong microcontroller or a bootloader without rollback becomes a respin, a recall or a fleet you cannot update. Getting the architecture right before the first prototype is the cheapest engineering you will buy.
India is now a serious place to build electronics, and Bangalore’s aerospace and electronics ecosystem puts test labs, distributors and EMS partners in one city. INARH pairs that with engineers who have taken devices through BIS and CE testing, so your product reaches production instead of stalling at prototype.
Our approach
Requirements and part selection
We fix timing, power, memory and cost targets, then shortlist MCUs and SoCs with long term availability.
Architecture and prototype
We choose bare metal, RTOS or Linux, define the bootloader and update strategy, and prove risky pieces on development kits.
Board bring up and integration
When the first boards land, we bring up power, clocks, debug and each peripheral in turn, then the application.
Validation
Hardware in the loop tests, power profiling and pre-compliance EMI scans catch issues before formal certification.
Production handover
We deliver fixtures, flashing procedures, key provisioning and documentation your manufacturer can follow without us on site.
Industries we serve
Industrial automation
Controllers and gateways that survive electrical noise and run for years unattended.
Medical devices
Battery powered monitors built with traceable requirements and IEC 62304 style documentation.
Automotive and electric mobility
Battery management, telematics and charger controllers with CAN and secure OTA.
Consumer and smart home
BLE and Wi-Fi products where cost, battery life and pairing decide the reviews.
Aerospace and defence
Deterministic firmware for test equipment and ground systems, drawing on Bangalore’s aerospace supplier base.
Technologies and tools
Microcontrollers and SoCs
- STM32
- ESP32
- nRF52 and nRF53
- NXP i.MX RT and i.MX 8
- Raspberry Pi RP2040
- TI MSP430
- Microchip SAM
- RISC-V
Operating systems
- FreeRTOS
- Zephyr
- Embedded Linux with Yocto and Buildroot
- Linux kernel drivers
- Bare metal C
Connectivity
- BLE
- Wi-Fi
- Thread and Matter
- LoRaWAN
- NB-IoT and LTE-M
- CAN
- Modbus
- MQTT
Edge AI
- TensorFlow Lite Micro
- Edge Impulse
- CMSIS-NN
- ONNX Runtime
- OpenVINO
Tools and testing
- JTAG and SWD debuggers
- Segger J-Link
- Logic analysers and oscilloscopes
- Hardware in the loop rigs
- pytest
- GitLab CI and Jenkins
Embedded Solutions questions
We design boards of moderate complexity and partner with specialist houses for high speed or RF heavy layouts. In every case we own the firmware and the integration.
Take your device from prototype to production
Send a block diagram or a short product description. An INARH embedded engineer will reply with an honest view of the risks and a plan.
